Add to carts Carbide Neck Turning Mandrels Sinclair International You can order Carbide Neck Turning Mandrels Sinclair International after check, compare the values and check day for shipping. Some people are need it Carbide Neck Turning Mandrels Sinclair International with the cheap price. While the item may be priced similarly at different shops.
Carbide Neck Turning Mandrels Sinclair International.
Sinclair stainless steel neck turning mandrels for 17 through 50 caliber cartridges are turned from high grade stainless steel on precision turning centers. Turning mandrels are sized .002" under bullet diameter. The shape and surface of all of our mandrels is the result of years of experimenting by many expert handloaders. Our Carbide turning mandrels are precision ground from solid carbide stock, which yields even closer tolerances. All Carbide mandrels are ground to .002" under bullet diameter. Adjustments on our NT-4000 turning tool will be more consistent with carbide mandrels due to the tighter tolerances of the mandrels. Large caliber (35 to 50 caliber) mandrels fit only the Large Caliber Expander Body and the NT-5000 Turning Tool.
Sinclair, Issue:5B, Page:019
Stainless Ultimate Trimmer Sinclair/l.e. Wilson.
The legendary L.E. Wilson Case Trimmer has just gotten better. Exclusive to Sinclair International, the L.E. Wilson Case Trimmer is now offered in a Stainless Steel model. We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head to create the Sinclair Stainless Ultimate Trimmer.
The L.E. Wilson Case Trimmer aligns and holds your cases square to the cutter during the trim process. This results in a virtually identical trim length for each case. It is accomplished with L.E. Wilson’s unique case holder system which holds the case by the body taper. The trimmer case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. No pilots or collets are utilized which could influence the trim results negatively. Now in stainless steel, the L.E. Wilson Trimmer is built to last for a lifetime of use.
Our Sinclair Micrometer head allows the reloader to easily adjust trim length in increments of .001" with an adjustment length of over 2". Our micrometer reads in “actual” case length, making it the most pleasurable micro trimmer to work with. Determine your trim length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. The micrometer features crisp, easy-to-read engravings and may be locked in place when set. Easily accommodates cases from 22 Hornet to 416 Rigby. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (#749-002-094) is necessary.
Completing the Sinclair Stainless Ultimate Trimmer is our Sinclair Mounting Stand with Shark Fin Clamp. This system makes easy work of installing and removing your trimmer case holder in a smooth “swing-arm” motion. The Shark Fin trimmer clamp secures the case head firmly against the micrometer adjustment head for a quick and accurate, chatter-free trim. * Trimmer Case Holders and accessories sold separately.
Big Book Catalog, Issue:68, Page:529
Sinclair, Issue:5B, Page:010
Wft 2 Trimmer Little Crow Gunworks, Llc..
The WFT 2 is the next generation of WFT trimmers. The two main improvements are the ability to trim up to 45 caliber and interchange trim chambers. The WFT 2 has a half inch shaft and requires a half inch chuck to drive it. The feature most customers asked for was the ability to interchange trim chambers. Instead of press fitting the trim chambers, like the original WFT, the trim chambers on the WFT 2 are a slight slip fit in bearing with a groove cut for an O-ring which creates a press fit. Changing out trim chambers is accomplished by removing the cutter and pushing out the trim chamber with the knock-out dowel that is provided. Installing the trim chamber is accomplished by setting the trim chamber on a flat surface and steadily pushing the housing onto the trim chamber. Setting the cutter depth is easily adjusted by placing a “master case” in the trim chamber and sliding the cutter up to the case mouth and tightening down the set screws. Trimming is just as precise and clean as with our original trimmer. The trim chamber selection on the WFT 2 is by specific cartridge, but still trims by case family-just order the largest chamber in the family that you intend to trim. This unit and its inserts do not chamfer or deburr the case moouth of the cartridge case as it is trimmed. If you can't find the cartridge you need, please contact our Special Order Department at 800-741-0015
Sinclair, Issue:5B, Page:009