Ar-15/ar 308 Hi-Speed National Match Trigger Set Geissele Automatics Llc.
User-Adjustable, Adaptable Premium Trigger
Geissele’s Hi-Speed National Match AR-15 Trigger combines their exceptional match-grade trigger with their Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets. Geissele’s adjustable Hi-Speed National Match AR-15 Trigger is designed for competition, hunting, and tactical sniper use, where exact trigger pull weight is essential for success.
The trigger comes with three spring sets, each applicable to a different type of shooting. The Hi-Speed Service Spring is designed for NRA High Power Service Rifle competition and is approved for use in CMP sanctioned competitions. Easily switch to the Hi-Speed Designated Marksman Rifle spring set for tactical and military shooting where trigger pull weight is not regulated. Hi-Speed Match spring set can be adjusted to low pull weights for enhanced trigger control, letting the shooter wring every ounce of accuracy out of his rifle
- Service Rifle pull: 3.2-5 lbs. (1st), .5 to 1.5 lbs. (2nd), 4.5 lbs. min. (total)
- DMR pull: 2.5 to 3.6 lbs. (1st), .5 to 1.5 lbs. (2nd), 3 to 5.1 lbs. (total)
- Match Rifle pull: 1.5 to 2.5 lbs. (1st), 8 oz. to 14 oz. (2nd), 1.9 to 3.4 lbs. (total)
With the Geissele Hi-Speed National Match Trigger in your AR-15, you can easily adjust the triggers first and second stage weight, as well as total pull weight and overtravel to your exact preference.
Big Book Catalog, Issue:71, Page:029
Ar-15 Mpc Drop-In Triggers Velocity Triggers.
Enhances Your AR-15's Trigger Pull
One of the best elements of the AR-15's flexibility and modularity is the ability of owners to install a one-piece trigger unit to enhance the trigger style and pull on their gun. One of the upgrade options on the market is the Velocity Triggers MPC Drop-In Trigger.
The Velocity Triggers MPC Drop-In Trigger is a single-stage trigger design produced for the utmost in precision shooting and can be had in a variety of different set-ups, all fine-tuned to fit the end user.
- Pull weight can be set between 3-4 pounds
- Can be had with straight, straight with a finger stop or curved triggers
- Different colors available
The Velocity Triggers MPC Drop-In Trigger can also be ordered in a range of different texture options, including smooth, rounded or serrated to fit user preferences.
Ar-15 Drop-In Trigger Module Solid Shoe Timney.
Obtain A Super-Smooth Pull & Crisp Letoff In Minutes
Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout. Available with standard solid trigger shoe with choice of 3 lb, 4 lb. or 4.5 lb. pull weight.
NOTE: For use in a polymer lower, a special plate is required which can be obtained directly from Timney at (623) 223-1111.
AR-15, Issue:11, Page:029
Big Book Catalog, Issue:71, Page:031
Sinclair, Issue:5B, Page:254
SPECS: Hammer – S7 tool steel, natural color, Teflon-Nickel coated. Trigger/Internal Components - Hardened A2 tool steel, black oxide finish. Housing – 6061 T6 aluminum, gold anodized finish. Fits rifles with .154" diameter hammer/trigger pin holes. Will not fit Colt-manufactured AR-15s with sear block.
Trigger-Happy Kit Wild West Guns.
Gives A Light, Clean Break, Without The "Flop"
Precision, EDM trigger and hand polished sear provide a crisp, clean 2 to 3 pound trigger pull. Unique, two-piece design eliminates annoying flop of the Marlin factory trigger. Produced to minimum tolerances, gives a safe, light trigger that helps improve accuracy for hunters; helps give Cowboy shooters that winning edge. Drop-in fit; installation requires complete action disassembly.
Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.
Big Book Catalog, Issue:71, Page:167
SPECS: Tool steel. Blue, matte finish or Nickel, silver finish. Hardened engagement surfaces. Fits all modern Marlin centerfire rifles; 1895, 1895G, 1895GS,1895M, 450M, 444, 336, and 1894 models. Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.
Super Scar Trigger Geissele Automatics Llc.
The Geissele Super SCAR trigger is a semi-automatic trigger that Geissele has developed as a retrofit for the FN SCAR 16 and FN SCAR 17. The Geissele Super SCAR trigger is designed to only fit into the standard polymer trigger housing manufactured by FN. The SCAR trigger is a non-adjustable, two-stage trigger but it is not a Match trigger. The Geissele SCAR trigger is ideally suited for Close Quarters Battle (CQB) and mid-range work. Comes with Aeroshell #6 Lubricant.
Big Book Catalog, Issue:71, Page:165
SPECS: The Geissele SCAR has a total pull weight of about 4.5lbs – 2.5lbs on the first stage and 2lbs on the second stage. The pull weight and sear engagement are not adjustable by the shooter.
Sig Sauer Mpx Single Stage Triggers Timney.
Enhance Your MPX Trigger
When SIG Sauer released its revolutionary MPX platform, it was set to revolutionize the pistol-caliber subgun market. Now, with the launch of the Timney Triggers MPX Single-Stage Trigger, owners can take this enhanced platform to an even higher level.
Designed to enhance the feel above the OEM trigger design, the Timney Triggers MPX Single-Stage Trigger drops right into the receiver of the MPX without any modification. Each trigger assembly is built with components made from heat-treated steel, all contained in an aluminum-alloy housing with an anodized finish.
Each Timney Triggers MPX Single-Stage Trigger is set from the factory for a pull weight of 3 pounds and cannot be adjusted. The trigger is compatible with all factory and aftermarket safeties on the MPX platform.
Ar-15 Saber Drop In Single Stage Trigger James Madison Tactical.
With a fast reset, a smoother, crisper, lighter trigger pull, The single-stage trigger group is easy to install.
- Works for both AR-15 and AR-308 type rifles
- 3.5- 4.0 lb. pull weight
- Quick reset for faster response time between shots
- Lightened trigger pull with super-crisp release to improve accuracy
- Curved skeleton trigger function and comfort
- Self-contained design makes it easy and quick to install with no fine-tuning needed
- Quality 17-4 Stainless steel hammer, trigger and disconnect
- Precision CNC and EDM machined from high-grade 6061-T6 aluminum and 17-4 ph SS
- Contained in JMT’s signature metallic silver anodized aluminum housing
- Comes with anti-rotation pins
Note: The set screw should not be tampered with. Any attempts to modify the trigger will void the warranty.
Big Book Catalog, Issue:71, Page:030
Ar-15 Enhanced Military-Style Triggers Alg Defense.
Gives A Smoother Pull While Preserving Reliability
Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. These are “enhanced standard” triggers, so the armorer continues to work with the configuration he’s accustomed to. The QMS (Quality Mil-Spec) set has the sear contact surface precision-honed to smooth and lighten the pull to around 6½ lbs. The ACT (ALG Combat Trigger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs.
AR-15, Issue:11, Page:027
Big Book Catalog, Issue:71, Page:028
Sinclair, Issue:5B, Page:255
SPECS: Hammer/trigger – 8620 steel. Disconnnector – 1070 high-carbon steel. Hammer/trigger pins – heat treated 4140 chrome-moly steel. Both kits contain trigger, trigger spring, hammer, 2 hammer springs, disconnnector, disconnnector spring, hammer and trigger pins, and instructions.?