"Today, if you do not want to disappoint, Check price before the Price Up.1911 Grip Bushing Staker Brownells You will not regret if check price." price comparisons for 1911 Grip Bushing Staker Brownells
1911 Grip Bushing Staker Brownells.
8-Segment, 90\ Head Gives Maximum Contact To Frame For Most Secure Bushing Installation Possible
1911 stock bushings get bunged up or lost in the field or when a pro is doing a "Master Reblue Job" they get removed to permit the finest possible polishing job. Then they have to be replaced and that can be a real chore. No more. With this special Brownells 1911 Auto Grip Bushing Staker, it's now quick and easy to get them tight on the first try. Made in 8 segments with 90° cuts between for maximum bushing contact to frame. Has "handle" and deep hole in top of Staker to prevent your 1/8" punch from slipping off. (The 1/8" punch passes thru bushing center on opposite side of frame to give clean access to bushing being replaced or tightened.) Note: Make an anvil block to support outside of bushing while it is being staked. Works great!
1911, Issue:11, Page:053
1911, Issue:11, Page:055
Big Book Catalog, Issue:71, Page:144
Big Book Catalog, Issue:71, Page:147
SPECS: Staker head - S5 Tool Steel with Rc 57-60 hardening. 4" (10.2cm) handle.
Sig Sauer P226 & P229 Slide Disassembly Tool K And C Barrels.
- Designed for the disassembly of the Sig Sauer E2 Slides used on the P226 and P229 pistols
- Manufactured from S7 high impact tool steel, hardened to 52-54 Rockwell
- Black oxide finish
- 3mm punch tip for the firing pin retention pin?
Big Book Catalog, Issue:71, Page:477
Barrel Chamfering Plug Gauges Brownells.
For Maximum Accuracy & Results Using Pistol Chamfering Tools
There is a very narrow, (.004") throat diameter range where maximum accuracy is obtained. Go smaller or larger and accuracy will suffer. By simply slipping the Plug Gauge into the barrel throat, it’s possible to tell at a glance when you are approaching the correct diameter. Warns you before you go too far. Also valuable as a diagnostic tool for guns brought in with accuracy complaints, (designed for chamfers cut with our tools - may not give a correct reading on guns with other degrees of chamfer). Each gauge is self-piloted, precision-ground, hardened and stepped to show minimum and maximum optimum diameters. 11° and 18° Gauge measures both chamfer angles. Sizes .22RF; .32; .38/.357; .38-40/.40; .41; .44; .45. 5° Ruger-Style Gauge available in .38/.357, .44 and .45 caliber only.
Big Book Catalog, Issue:71, Page:484
Beretta Pin Punches Brownells.
Sized to fit the metric roll pins found on the Beretta 92 Series pistols.
Big Book Catalog, Issue:71, Page:475
Sig Combo Tool Sig Arms.
Handy Tool For Bench Or Field Use
Multi-use tool with large, easy-to- grasp handle performs several maintenance and repair tasks. Removes grip screws, mainspring assembly; provides controlled removal of mainspring. Installs and removes sear spring and magazine catch. Handy to have on the bench, indispensable for emergencies in the field.
Big Book Catalog, Issue:71, Page:476
SPECS: Plastic handle, steel shank. Approximately 7½" (19cm) long. Four interchangeable bits. Fits 220, 225, 226, 228, 229, 230, 232. 239, 245.
All In One Tool For Glock™ Strike Industries.
The Strike Industries Glock™ all-in-one tool features all appropriate sizes of pin punches, sight removal tool and base plate removal key in one compact unit. What makes us stand above the rest is our base plate opener function; users no longer need a complicated tool to open their magazine base pate; this tool will allow you to open the base plate in T-3 seconds. This tool features a compact design creating ease of storage while it's all steel construction will stand up to any abuse derived from wear and tear or just being tossed into a range bag. Light, efficient, and convenient; it compliments any serious Glock™ owner.
- Length: 2.85”
- Width: 1.16”
- Height: 0.48”
- Weight: 2.6 oz
- Materials: Steel
- Color: black and chrome
1911 Sear Stoning Fixture Brownells.
Helps You Adjust Primary Sear Angle For A Perfect Trigger Pull
Easy-to-use, hand-held tool retains the sear and positions it so you can stone the contact surfaces at the correct angles to produce a smooth, clean-breaking trigger free from unwanted creep. Helps you produce precise, mirror-finish surfaces for complete, full-width contact with the hammer to ensure reliable ignition while preserving proper operation of the thumb safety. Raising or lowering the fixture’s setscrew lets you change sear angle. Fixture body is machined from solid carbon steel for years of service without loss of alignment. Includes a hardened, stainless steel .020" thick shim that prevents you from removing too much material from the sear, and protects the fixture body from wear.
1911, Issue:11, Page:060
Big Book Catalog, Issue:71, Page:150