"Today, if you do not want to disappoint, Check price before the Price Up.Mainspring Vise Track Of The Wolf You will not regret if check price." who sells Mainspring Vise Track Of The Wolf
Mainspring Vise Track Of The Wolf.
Compresses "V" Springs Effortlessly
New improved design makes it much easier to compress tough mainsprings with two rotating, adjustable jaws that screw down securely. Adapts to angle of spring, spreads compression evenly over the entire spring area and is perfect for installing “V” springs in shotguns and muzzleloaders. Wide turnkey allows you to use your thumb and index finger to really squeeze tough springs down without the need for makeshift tools.
Big Book Catalog, Issue:71, Page:424
Big Book Catalog, Issue:71, Page:471
Hammer/sear Pin Block Kit Brownells.
Allows Visual Inspection Of Hammer & Sear Engagement
Machined steel block allows you to mate the hammer and sear (or trigger) outside of the firearm for a clear, unobstructed view of the critical point of engagement. Accepts a wide selection of hammer and sear pins sized for various handguns and rifles. Dovetailed adjustment block rides in slotted channel so pin spacing can be precisely set to match individual frames and receivers. Allen screw locks the pin setting so hammer and sear can be dropped in place relative to their actual position in the firearm. Great for cutting the engagement surfaces on new parts or fine-tuning the factory ones. Pins are individually numbered for proper identification. Kit is packaged in a see-thru, plastic box and contains hammer/sear pin block and all nine sets of special pins for popular gun models. Block and pins also available separately.
1911, Issue:11, Page:062
Big Book Catalog, Issue:71, Page:151
Big Book Catalog, Issue:71, Page:442
SPECS: Block - Steel, blued. Pins - Stainless steel. 2½ (6.4cm) long, 11/16" (1.7cm) wide. Kit includes plastic storage box.
S&w Cylinder & Hand Window Files Grobet File Co. Of America Inc.
Only Files Available To Do This Job Right
When replacing the cylinder stop or hand in a S&W revolver, you may have to open up the "window" in the frame to accept the new part. These double-ended, offset files, will do the job.
Big Book Catalog, Issue:71, Page:479
Big Book Catalog, Issue:71, Page:482
Ruger® Mark I/ii™/iii™ Speed Strip Kit Majestic Arms, Ltd..
Replaces Factory Parts For Fast Field Stripping & Cleaning
Makes field stripping your Ruger® .22 pistol faster and easier by enabling rapid disassembly with a single Allen wrench for routine cleaning and maintenance. Replaces the factory hammer and sticky bolt stop pin that make bolt removal a real chore. Replacement parts are precision machined from high-grade stainless steel to tolerances that meet or exceed the factory parts. Requires no permanent modification to your pistol; gunsmith installation recommended. The 3.2 Conversion Kit will fit any Ruger® .22 Auto Pistol and allows MK III™ owners to safely omit the magazine disconnect feature. This kit is supplied with a new hammer pivot bushing, which reduces pre-travel by 65%.
Big Book Catalog, Issue:71, Page:218
SPECS: Stainless steel, natural silver finish. Kit includes replacement hammer and bolt stop pin, plus Allen wrench and illustrated installation instructions. Mark I/Mark II™ fits Ruger® Mark I, II™, and 22/45™ pistols. Mark III™ fits Ruger® Mark III™ pistol only. 3.2 Kit fits all Ruger® .22 Auto Pistols
1911 Mainspring Housing Installation Jig Ed Brown.
Quickly and easily locate new frame hole for bobtail housing
1911, Issue:11, Page:021
Big Book Catalog, Issue:71, Page:116
Sinclair, Issue:1A, Page:020
Smith & Wesson Sight Nut Spanner Brownells.
Parts Required For S&W Factory Rear Sights
MAGNA-TIP® Bit, made to fit the windage nut that secures the S&W rear sight leaf. To use: Drill out staking, hold nut with Spanner and unscrew the screw. To install: Hold new nut with Spanner and seat screw. Always turn the screw; never the nut. Because it is fragile, and can break if you turn it, the Spanner is not guaranteed against breakage.
Big Book Catalog, Issue:71, Page:318
Big Book Catalog, Issue:71, Page:433
1911 Sear Jig Marvel.
CNC-machined, aluminum sear jig with stainless steel roller is preset to cut the primary and relief angles. Steel post corresponds with sear hole; side clamp holds the sear in place. Change angles by releasing the clamp and pressing down on the sear. Steel thread inserts in the drilled screw holes prevent wearing during adjustments.
1911, Issue:11, Page:060
Big Book Catalog, Issue:71, Page:150
SPECS: Aluminum jig body and sear vise, natural finish. Steel roller. 3-3/8" (8.5cm) L x 1¾" (4.4cm) H x 1" (2.5cm) W.
1911 Collar Reverse Plug Reamer Egw.
Self-piloted Reamer cuts the spring guide tunnel to the proper depth and diameter.
1911, Issue:11, Page:015
Big Book Catalog, Issue:71, Page:109
Sinclair, Issue:1A, Page:014
SPECS: Tool Steel (TS) or Carbide (Carb.) blades. 8" (20cm) long, 7/16" (11.1mm) dia. shank.